De-Sta-Co Hydraulic Power Workholding, Hollow Cylinder, I.D.=.50, Port=#4 SAE (1 Each)

De-Sta-Co Hydraulic Power Workholding, Hollow Cylinder, I.D.=.50, Port=#4 SAE (1 Each) Review

These hollow cylinders can be used to push or pull depending on the position of the ram. They will actuate a rod of any length or shape and are extremely effective in translating power to a remote location. Larger piston diameter provides greater clamping force. Hardened steel piston and rod. Supplied with through hole insert threaded into the top. Optional thread inserts (inch/metric) are available as special order. An accessory adapter plate,which fastens to the ram base and permits mounting the ram with a single cap screw is also available as special order. Please call for price and delivery. Maximum input pressure is 3,500 psig.

Starrett 190A "Little Giant" Jack set (SE50681)

Starrett 190A "Little Giant" Jack set (SE50681) Review

Starrett 190A "Little Giant" Jack set (SE50681) Feature

• No. 190 have 20-pitch screws and for those who desire a finer adjustment

"Little giant" jack screws are very handy for leveling work on planer beds, upright drills, setting up machinery, and for general use in the toolroom or machine shop.

DE-STA-CO 2013-UR Horizontal Handle Hold Down Action Clamp

DE-STA-CO 2013-UR Horizontal Handle Hold Down Action Clamp Review

DE-STA-CO 2013-UR Horizontal Handle Hold Down Action Clamp Feature

• New generation toggle clamp with over 2 times the capacity of our legacy models
• Longer handle with greater hand clearance
• Toggle Lock Plus
• Clamp supplied with neoprene spindle
• Spindle contacts workpiece vertically

Toggle action clamps are used throughout manufacturing for a wide range of standard and specialized Work holding applications. Their relative simplicity and design adaptability make them an indispensible member of the family of Work holding devices.

De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1-12 thds., Stroke=.500 (1 Each)

De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1-12 thds., Stroke=.500 (1 Each) Review

Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial.

DE-STA-CO 2005-U Horizontal Handle Hold Down Action Clamp

DE-STA-CO 2005-U Horizontal Handle Hold Down Action Clamp Review

DE-STA-CO 2005-U Horizontal Handle Hold Down Action Clamp Feature

• New generation toggle clamp with up to 3 times the holding capacity of our 205 Series clamps
• Increased hand clearance
• Reduced pinch points
• Clamp supplied with neoprene spindle
• Near vertical spindle contact

Toggle action clamps are used throughout manufacturing for a wide range of standard and specialized Work holding applications. Their relative simplicity and design adaptability make them an indispensible member of the family of Work holding devices.

DE-STA-CO 2002-UR207 Vertical Handle Hold Down Toggle Clamp With 207 Mounting Pattern And Toggle Lock Plus

DE-STA-CO 2002-UR207 Vertical Handle Hold Down Toggle Clamp With 207 Mounting Pattern And Toggle Lock Plus Review

DE-STA-CO 2002-UR207 Vertical Handle Hold Down Toggle Clamp With 207 Mounting Pattern And Toggle Lock Plus Feature

• New generation toggle clamp with 3 times the capacity of our legacy models
• Longer handle with greater hand clearance
• Longer clamp arm
• Bolts up to legacy models 202 and 207

Toggle action clamps are used throughout manufacturing for a wide range of standard and specialized Workholding applications. Their relative simplicity and design adaptability make them an indispensible member of the family of Workholding devices.

DE-STA-CO 2017-U Horizontal Handle Hold Down Action Clamp

DE-STA-CO 2017-U Horizontal Handle Hold Down Action Clamp Review

DE-STA-CO 2017-U Horizontal Handle Hold Down Action Clamp Feature

• New generation toggle clamp with over 2.5 times the capacity of our legacy items
• Longer handle with greater hand clearance
• Longer clamp arm
• Clamp supplied with neoprene spindle
• Spindle contacts workpiece vertically

Toggle action clamps are used throughout manufacturing for a wide range of standard and specialized Work holding applications. Their relative simplicity and design adaptability make them an indispensible member of the family of Work holding devices.

Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-122, Use w/cap.=2,600 lbs. (1 Each)

Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-122, Use w/cap.=2,600 lbs. (1 Each) Review

These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length.

DE-STA-CO 601-O Straight-Line Action Clamp

DE-STA-CO 601-O Straight-Line Action Clamp Review

DE-STA-CO 601-O Straight-Line Action Clamp Feature

• outside thread on plunger
• Pneumatic version available as model 816
• Internally threaded plunger

Smallest of our straight line clamps.

DE-STA-CO 267-U Vertical Hold-Down Action Clamp

DE-STA-CO 267-U Vertical Hold-Down Action Clamp Review

DE-STA-CO 267-U Vertical Hold-Down Action Clamp Feature

• Heavy duty vertical hold down clamp is the largest of our stamped toggle clamp
• U-Bar models supplied with hex head spindle

Toggle action clamps are used throughout manufacturing for a wide range of standard and specialized Workholding applications. Their relative simplicity and design adaptability make them an indispensible member of the family of Workholding devices.

DE-STA-CO 6001 Plunger Clamp

DE-STA-CO 6001 Plunger Clamp Review

DE-STA-CO 6001 Plunger Clamp Feature

• Base can be side mounted
• 50% more capacity than model 601

Heavier duty version of model 601.

8" x 8" x 1 5/8 (L x H x W), Super HD, 325 lbs. pull, Welding Square, Magnetic Workholding

8" x 8" x 1 5/8 (L x H x W), Super HD, 325 lbs. pull, Welding Square, Magnetic Workholding Review

8" x 8" x 1 5/8 (L x H x W), Super HD, 325 lbs. pull, Welding Square, Magnetic Workholding Feature

• Ideal for welders that need fast set-up and accurate holding of steel sheet stock, plate and tubing
• Hold work pieces at 45«M,1[Degree]», 90«M,1[Degree]», 135«M,1[Degree]» and 180«M,1[Degree]» angles
• IM-343 and IM-344 models feature «M,12[Start Quotes]»Breakaway Handle«M,13[End Quotes]»
• Weld spatter resistant covers on certain mode

Magnetic Workholding - Magnetic Welding Squares

DE-STA-CO 528-F Vertical Hold-Down Action Clamp

DE-STA-CO 528-F Vertical Hold-Down Action Clamp Review

DE-STA-CO 528-F Vertical Hold-Down Action Clamp Feature

• Designed for tough, heavy duty workholding
• 1000 lb. Capacity
• Forged hold down bar can be cut or welded

Toggle action clamps are used throughout manufacturing for a wide range of standard and specialized Workholding applications. Their relative simplicity and design adaptability make them an indispensible member of the family of Workholding devices.

DE-STA-CO 424-2 Squeeze-Action Clamp

DE-STA-CO 424-2 Squeeze-Action Clamp Review

DE-STA-CO 424-2 Squeeze-Action Clamp Feature

• Supplied with 2 neoprene spindles

The smallest in our line of forged alloy steel squeeze action clamps with 2 threaded adjustment spindles.

DE-STA-CO 640-R Straight-Line Action Clamp With Toggle Lock Plus

DE-STA-CO 640-R Straight-Line Action Clamp With Toggle Lock Plus Review

DE-STA-CO 640-R Straight-Line Action Clamp With Toggle Lock Plus Feature

• Locks in both extended and retracted position
• Features DE-STA-CO Toggle Lock Plus
• Ergonomic handle grip supplied
• Internally threaded plunger

Designed for heavy duty service. Offers our longest stroke plunger travel and features DE-STA-CO Toggle Lock Plus.

Starrett S154SZ Adjustable Parallels Set, 3/8" - 1-5/16" Range, 1-3/4" - 3-9/16" Length Size, 4 Pieces

Starrett S154SZ Adjustable Parallels Set, 3/8" - 1-5/16" Range, 1-3/4" - 3-9/16" Length Size, 4 Pieces Review

Starrett S154SZ Adjustable Parallels Set, 3/8" - 1-5/16" Range, 1-3/4" - 3-9/16" Length Size, 4 Pieces Feature

• All parallels are 9/32" thick
• Available in case

The set includes the smaller sizes ranging 3/8-1/2", 1/2-11/16" and 11/16-15/16" are locked by one screw and the larger size ranging 15/16-1-5/16 has two lock screws. Starrett adjustable parallels provide a wide range of use in layout, gaging, inspection work and for setups on various machine tools. Their adjustable feature makes it possible to adjust them to exact size by micrometer measurement and also permits use in place of several solid-type parallels. These parallels are useful as gages in checking the size of slots and openings. They are also convenient for use in machine vises, for leveling or adjusting work on setups of milling and grinding machines, shapers, planers, drill presses and for many other applications.

DE-STA-CO 6015 Straight-Line Action Clamp

DE-STA-CO 6015 Straight-Line Action Clamp Review

DE-STA-CO 6015 Straight-Line Action Clamp Feature

• Locks in both extended and retracted position

Smallest machined cast base plunger clamp.