DE-STA-CO 807-U Pneumatic Hold Down Clamp

DE-STA-CO 807-U Pneumatic Hold Down Clamp Review

DE-STA-CO 807-U Pneumatic Hold Down Clamp Feature

• Pneumatic version of DE-STA-CO model 207-U
• Supplied with magnetic ring for position sensing

Pneumatic Hold Down Clamp.

Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-53 (1 Each)

Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-53 (1 Each) Review

Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only.

DE-STA-CO 609-B Straight-Line Clamp

DE-STA-CO 609-B Straight-Line Clamp Review

DE-STA-CO 609-B Straight-Line Clamp Feature

• Locks in both extended and retracted position
• Straight Base
• Ergonomic handle grip supplied
• Internally threaded plunger

Lightweight stamped straight base has a bushing inserted for added stability for the plunger.

DE-STA-CO 516-B Vertical Hold-Down Action Clamp

DE-STA-CO 516-B Vertical Hold-Down Action Clamp Review

DE-STA-CO 516-B Vertical Hold-Down Action Clamp Feature

• Offers two times the capacity of model 207 in the same envelope size
• 750 lb. capacity
• Forged hold down bar can be cut or welded

Toggle action clamps are used throughout manufacturing for a wide range of standard and specialized Workholding applications. Their relative simplicity and design adaptability make them an indispensible member of the family of Workholding devices.

Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-2131ST (1 Each)

Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-2131ST (1 Each) Review

These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories.

De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1 5/16-16 thds., Stroke=1.000 (1 Each)

De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1 5/16-16 thds., Stroke=1.000 (1 Each) Review

Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial.

DE-STA-CO 2013-U Horizontal Handle Hold Down Action Clamp

DE-STA-CO 2013-U Horizontal Handle Hold Down Action Clamp Review

DE-STA-CO 2013-U Horizontal Handle Hold Down Action Clamp Feature

• New generation toggle clamp with over 2 times the capacity of our legacy models
• Longer handle with greater hand clearance
• Longer clamp arm
• Clamp supplied with neoprene spindle
• Spindle contacts workpiece vertically

Toggle action clamps are used throughout manufacturing for a wide range of standard and specialized Work holding applications. Their relative simplicity and design adaptability make them an indispensible member of the family of Work holding devices.

6 1/8 x 3 3/8 x 5/8 (L x H x W), Adjustable, 110 lbs. pull, Welding Square, Magnetic Workholding (1 Each)

6 1/8 x 3 3/8 x 5/8 (L x H x W), Adjustable, 110 lbs. pull, Welding Square, Magnetic Workholding (1 Each) Review

6 1/8 x 3 3/8 x 5/8 (L x H x W), Adjustable, 110 lbs. pull, Welding Square, Magnetic Workholding (1 Each) Feature

• Ideal for welders that need fast set-up and accurate holding of steel sheet stock, plate and tubing
• Hold work pieces at 45«M,1[Degree]», 90«M,1[Degree]», 135«M,1[Degree]» and 180«M,1[Degree]» angles
• IM-343 and IM-344 models feature «M,12[Start Quotes]»Breakaway Handle«M,13[End Quotes]»
• Weld spatter resistant covers on certain mode

Magnetic Workholding - Magnetic Welding Squares

De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 2 1/2-16 thds., Stroke=1.000 (1 Each)

De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 2 1/2-16 thds., Stroke=1.000 (1 Each) Review

Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial.

1/4-20 x .80, End force - 2.5 lbs., Inch, Steel Body/Nose, L-Handle, Locking Element, Locking, Hand Retractable Spring Plunger (1 Each)

1/4-20 x .80, End force - 2.5 lbs., Inch, Steel Body/Nose, L-Handle, Locking Element, Locking, Hand Retractable Spring Plunger (1 Each) Review

Lever - Spring Loaded Devices - Pins & Plungers Type: Locking Thread Size: 1/4-20 Locking Element: Yes Material: Steel Plunger Diameter: 0.160 In. Projection: 0.38 In.

DE-STA-CO 610 Straight-Line Action Clamp

DE-STA-CO 610 Straight-Line Action Clamp Review

DE-STA-CO 610 Straight-Line Action Clamp Feature

• Locks in both extended and retracted position

Lightweight stamped base has a bushing inserted for added stability for the plunger.

Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-9131ST (1 Each)

Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-9131ST (1 Each) Review

These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories.

DE-STA-CO 202 Hold-Down Action Clamp

DE-STA-CO 202 Hold-Down Action Clamp Review

DE-STA-CO 202 Hold-Down Action Clamp Feature

• One of the most popular series in our line of vertical hold-down clamps. Ideal for use in checking fixtures
• Supplied with neoprene spindle
• Ergonomic handle grip included, along with T-handle options
• Pneumatic version is model 802-U

Toggle action clamps are used throughout manufacturing for a wide range of standard and specialized Workholding applications. Their relative simplicity and design adaptability make them an indispensible member of the family of Workholding devices.

RGHS-128-4 Steel Angle Gripper .750 wide, 1/4-28 thds.

RGHS-128-4 Steel Angle Gripper .750 wide, 1/4-28 thds. Review

Grippers - Steel Angle Grip - For use on N.A. Woodworth ball lock chuck.

Enerpac Hydraulic Power Workholding Threaded Cylinder, Double Acting, No. WMT-39 (1 Each)

Enerpac Hydraulic Power Workholding Threaded Cylinder, Double Acting, No. WMT-39 (1 Each) Review

Cylinders can be fixtured into manual strap or bridge clamp assemblies. Fully threaded bodies allow cylinders to be threaded directly into tapped holes of the fixture for easy installation. Available as single-acting spring return or double acting hydraulic return. The VE-90 can use carbide grippers.

Mitee-Bite MB-31100 Inside Diameter Expansion Fixture Clamp Mitee-Bite Clamping System, ID Xpansion Clamps

Mitee-Bite MB-31100 Inside Diameter Expansion Fixture Clamp Mitee-Bite Clamping System, ID Xpansion Clamps Review

Mitee-Bite MB-31100 Inside Diameter Expansion Fixture Clamp Mitee-Bite Clamping System, ID Xpansion Clamps Feature

• Ideal for secondary operations on lathe parts
• Easily machined to size on lathe or mill
• Excellent for palletized setups
• Allows more parts per work cube or fixture plates
• Clamp body made of mild steel for machinability

Clamping Systems - ID XpansionTM Clamps - These clamps are ideal to hold multiple parts on an inside diameter for machining on a machining center. These clamps are produced in 10 sizes and can hold internal diameters from .16" to 4.06". Expand clamp approximately .005" over relaxed diameter and machine to fit work piece bore.

3 3/8 x 2 9/16 x 1/2 (L x H x W), 10 Angle, 23 lbs. pull, Welding Square, Magnetic Workholding (1 Each)

3 3/8 x 2 9/16 x 1/2 (L x H x W), 10 Angle, 23 lbs. pull, Welding Square, Magnetic Workholding (1 Each) Review

3 3/8 x 2 9/16 x 1/2 (L x H x W), 10 Angle, 23 lbs. pull, Welding Square, Magnetic Workholding (1 Each) Feature

• Ideal for welders that need fast set-up and accurate holding of steel sheet stock, plate and tubing
• Hold work pieces at 45«M,1[Degree]», 90«M,1[Degree]», 135«M,1[Degree]» and 180«M,1[Degree]» angles
• IM-343 and IM-344 models feature «M,12[Start Quotes]»Breakaway Handle«M,13[End Quotes]»
• Weld spatter resistant covers on certain mode

Magnetic Workholding - Magnetic Welding Squares